- ページ 6
計測機器 e-survey HP50のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。e-survey HP50 9 ページ。 High-precision gnss module
5. Connect the external Antenna
To have better antenna phase center measurement, user can replace the default antenna with
the MCX port.
6. Software configuration
To configurate the HP50 module, user must have the correct firmware on UT30. If there is a
software named "Satellite Settings"
eSurvey support for the new firmware. Note:
1. The software just needs to be configurated at the first time. All the settings will be saved when
user press back/home button.
2. Extra GNSS satellite system: [All] mode includes GPS+BDS+GLONASS+GALILEO+SBAS.
3. To change the setting, all the software that requires location need to be stopped. Otherwise,
the setting will not take effect. User can also disable Android location before making changes.
6.1 Basic Setting
Click the setting button
power always on]. This option allows the HP50 module work in the background even no software
requires position to fasten the position initialization speed.
on UT30, then it is normal. Otherwise, please contact
at the up-right corner. User can enable/disable [External module
3
HP50 User Manual