e-survey HP50 사용자 설명서 - 페이지 6

{카테고리_이름} e-survey HP50에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. e-survey HP50 9 페이지. High-precision gnss module

5. Connect the external Antenna

To have better antenna phase center measurement, user can replace the default antenna with

the MCX port.

To configurate the HP50 module, user must have the correct firmware on UT30. If there is a

software named "Satellite Settings"

eSurvey support for the new firmware. Note:

1. The software just needs to be configurated at the first time. All the settings will be saved when

user press back/home button.

2. Extra GNSS satellite system: [All] mode includes GPS+BDS+GLONASS+GALILEO+SBAS.

3. To change the setting, all the software that requires location need to be stopped. Otherwise,

the setting will not take effect. User can also disable Android location before making changes.

Click the setting button

power always on]. This option allows the HP50 module work in the background even no software

requires position to fasten the position initialization speed.

on UT30, then it is normal. Otherwise, please contact

at the up-right corner. User can enable/disable [External module

HP50 User Manual