- ページ 8

超音波ジュエリークリーナー James products ULTRA 8050のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。James products ULTRA 8050 12 ページ。 Digital ultrasonic cleaner

OPERATION INSTRUCTIONS

How do I use the Ultra 8050 cleaner?

Note: To avoid causing permanent damage: Never operate the unit without water in the

cleaning tank. Never use boiling water.

Open the lid. Place the items to be cleaned on the

tray (supplied) and place the tray in the tank.

To avoid the possibility of scratches from

friction during operation, do not overlap

items. Ensure items are spaced apart.

Add warm tap water (ideally 45 to 50OC - this helps the

unit achieve maximum cleaning potential more quickly) in the

stainless steel tank, ensuring that the items and tray are covered

but the water level is between the "MIN" and "MAX" marking.

Do not exceed the "MAX" marking on the inside of the tank.

Close the lid and ensure your hands are dry. Plug the supplied

mains cable into the unit and then into the nearest mains outlet.

When the unit is plugged in, the display will show the 180

second (3 minute) setting. If a different time is required, press

the SET button to cycle the time through the five settings

180s - 280s - 380s - 480s - 90s. Move to the next step when the

display shows your required time.

Press the ON button to start cleaning. The green operation

indicator will illuminate while the unit is in operation. The built in

timer will count down the time automatically.

When the timer counts down to 000 the unit will automatically

stop. If required, you can press the OFF button at any time to

stop or pause the cleaning process. Press the ON button again

to resume cleaning and continue the countdown.

When cleaning has finished, you can press the ON button again

to repeat the process.

Note: During operation the unit will "buzz", this is normal.