James products ULTRA 8050 Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Ультразвуковой очиститель ювелирных изделий James products ULTRA 8050. James products ULTRA 8050 12 страниц. Digital ultrasonic cleaner
Печатать страницуOPERATION INSTRUCTIONS
How do I use the Ultra 8050 cleaner?
Note: To avoid causing permanent damage: Never operate the unit without water in the
cleaning tank. Never use boiling water.
Open the lid. Place the items to be cleaned on the
1
tray (supplied) and place the tray in the tank.
1
To avoid the possibility of scratches from
friction during operation, do not overlap
items. Ensure items are spaced apart.
Add warm tap water (ideally 45 to 50OC - this helps the
unit achieve maximum cleaning potential more quickly) in the
stainless steel tank, ensuring that the items and tray are covered
but the water level is between the "MIN" and "MAX" marking.
Do not exceed the "MAX" marking on the inside of the tank.
Close the lid and ensure your hands are dry. Plug the supplied
2
2
mains cable into the unit and then into the nearest mains outlet.
When the unit is plugged in, the display will show the 180
second (3 minute) setting. If a different time is required, press
the SET button to cycle the time through the five settings
180s - 280s - 380s - 480s - 90s. Move to the next step when the
display shows your required time.
Press the ON button to start cleaning. The green operation
indicator will illuminate while the unit is in operation. The built in
3
3
timer will count down the time automatically.
When the timer counts down to 000 the unit will automatically
stop. If required, you can press the OFF button at any time to
stop or pause the cleaning process. Press the ON button again
to resume cleaning and continue the countdown.
When cleaning has finished, you can press the ON button again
to repeat the process.
Note: During operation the unit will "buzz", this is normal.
6