- ページ 4

IPカメラ ALIBI ALI-NS4018RのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。ALIBI ALI-NS4018R 4 ページ。 Ip bullet cameras

Mirror: Mirror adjustment enables you to flip the image (Up/Down), flip Left/Right
(reflect or Center).
Rotate: Rotate rotates the image +90 degrees. Rotate and Mirror can be used to
adjust the image in any orientation.
Video Standard: Select 60 Hz for NTSC format.
Capture Mode: To make a complete use of the 16:9 aspect ratio, you can enable the
capture mode when you use the camera in a narrow view scene.
Other: Options in this menu depend on the features of the camera.
Specifications
Camera
ALI-NS4015R / ALI-NS4015RB
Image Sensor:
1/2.8" Progressive Scan CMOS
Signal System:
NTSC
Min. Illumination:
Color: 0.01 lux @(F1.2, AGC ON), 0 lux with IR
Shutter time:
1/3 s to 1/100,000 s
Slow shutter:
Support
Lens:
2.8 mm, horizontal field of view: 81°
Lens Mount:
M12
Adjustment Range:
Pan: 0° ~ 360°, tilt: 0° ~ 90°, rotate: 0° ~ 360°
Day& Night:
IR cut filter with auto switch
Wide Dynamic Range:
120 dB
Digital noise reduction:
3D DNR
Compression Standard
Main stream: H.265 / H.264,
Video Compresion
Sub stream: H.265 / H.264 / MJPEG,
Third stream: H.265 / H.264
H.264 Type
Main Profile/High Profile
H.264+
Supports
H.265 Type
Main Profile
H.265+
Supports
Video bit rate:
32 Kbps ~ 16 Mbps
Image
Max. Image Resolution:
2560 × 1920
20 fps (2560 × 1920),
Main Stream:
30 fps (2560 × 1440, 2048 × 1536,
1920 × 1080, 1280 ×720)
Sub Stream:
30 fps (640 × 360, 352 × 240)
Third Stream:
30fps (1280 ×720, 640 × 360, 352 × 240)
Image Enhancement:
BLC/3D DNR
Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or
Image Settings:
web browser
Region of Interest (ROI):
Support 1 fixed region for mainstream and sub stream separately
Day/Night Switch:
Auto/Scheduled
Network
Network Storage
Support microSD / SDHC / SDXC card up to 128GB local storage, NAS (NFS, SMB / CIFS), ANR
Motion Detection, Tampering Alarm, Network Disconnected, IP Address Conflict, Illegal Login,
Alarm Trigger
HDD full, HDD error
TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP,
Protocols:
SMTP, SNMP, IGMP, 802.1X, QoS, IPv6
One-key reset, anti-flicker, heartbeat, mirror, password protection, privacy mask, Watemark,
General Functions
IP address filtering
System Compatibility:
ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI
Interface
Communication
1 RJ45 10M/100M Ethernet interface
Interface:
In-camera storage:
Built-in microSD / SDHC / SDXC slot, up to 128GB
Smart Features
Line crossing detection, Intrusion detection, Unattended baggage detection, Object removal
Behavior Analysis
detection
Line Crossing Detection
Cross a pre-defined virtual line, up to 1 pre-defined virtual line supported
Intrusion Detection
Enter and loiter in a pre-defined virtual region, up to 1 pre-defined virtual regions supported
4
www.observint.com
ALI-NS4018R
1/2.5" Progressive Scan CMOS
2.8 mm, horizontal field of view: 102°
3840 × 2160
20 FPS (3840 × 2160),
30 FPS (2560 × 1920, 2560 × 1440,
1920 × 1080, 1280 × 720)
Camera
ALI-NS4015R / ALI-NS4015RB
Unattended Baggage
Objects left over in the pre-defined region such as the baggage, purse, dangerous materials
Object Removal
Objects removed from the pre-defined region, such as the exhibits on display.
Face Detectionn
Human face appears in the image can be detected and trigger linkage method
General
Operating Conditions:
-22 °F ~ 140 °F (-30 °C ~ 60 °C), Humidity 95% or less (non-condensing)
12 Vdc ± 25%, 6 W,
Power Consumption:
PoE (802.3af, 42.5 – 57V, class 3), 7 W
Weather Proof:
IP67
IR Range:
Up to 120 ft (approx. 35 m)
Housing
White
Camera: Φ2.76" × 6.1" (Φ70 × 155 mm)
Dimensions:
Package: 8.5" × 4.76" × 4.65" (216 × 121 × 118 mm)
Weight:
Camera: 0.9 lb (410 g)
Using the Waterproof Ethernet Fitting
Install the Waterproof Ethernet Fitting on the Enternet cable end at the camera when moisture
or contamination exists in the area near the caemra. The fitting includes several parts that must be
installed in a specific order. To install the fitting:
1.
Place the rubber O-ring over the camera drop cable end cap.
Push the O-ring up to the connector cap.
2.
Place the Lock Nut onto the network cable from the router
or switcn as shown in the drawing to the right. The inside
threads must be toward the camera end.
3.
Place the rubber basket onto the network cable above the lock
nut as shown.
4.
Place the end cap onto the network cable above the rubber
gasket as shown. The fingered end must be toward the the
router or switch.
5.
Install an RJ-45 connector onto the network cable.
6.
Plug the RJ-45 connector with the network cable into the
camera network drop cable.
7.
Fit the end cap on the network cable onto the camera drop
cable end cap. Rotate the network cable end cap to lock it in
place.
8.
Push the rubber gasket fully into the end of the network cable
end cap.
9.
Screw the lock nut onto the network cable end cap until it is
fully seated.
Network drop
cable from
camera
Fitting assembled
Waterproof Ethernet Fitting assembed and connected
ALI-NS4018R
12 Vdc ± 25%, 7 W,
PoE (802.3af, 42.5 – 57V, class 3), 7.5 W
Network drop
cable from
camera
Drop cable
end cap
Rubber
O-ring
seal
RJ-45
connector
End cap
Rubber
gasket
Network cable from
router or switch
Lock nut
Network
cable
from
router or
switch
© 2017 Observint Technologies. All rights reserved.