- ページ 8

電動工具 Makita BO6030のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita BO6030 14 ページ。 Random orbit sander
Makita BO6030 にも：取扱説明書 (17 ページ), 部品内訳 (2 ページ), 取扱説明書 (8 ページ), 技術情報 (8 ページ), 取扱説明書 (13 ページ), 取扱説明書 (15 ページ), 取扱説明書 (8 ページ)

ページを印刷する

ASSEMBLY

Front grip

Install the front grip on the tool

that

its

protrusions fit into the matching notches in

the front of the tool. Secure the front grip

using a screwdriver to tighten the screw

through the hole in the front grip.

Installing or removing abrasive disc

CAUTION:

Always be sure that the tool is switched off and unplugged before installing or removing

Always use hook-and-loop system abrasive discs. Never use pressure-sensitive abrasive

the abrasive disc.

discs.

To install the abrasive disc, first remove all

dirt or foreign matter from the pad. Then

attach the abrasive disc to the pad, using

the hook-and-loop system of the abrasive

disc and the pad. Be careful to align the

holes in the abrasive disc with those in the

pad.

To remove the disc from the pad, just pull

up from its edge.

Changing pad

Makita offers an extensive range of op-

tional super soft and standard equipped

soft pads. Remove the screw counterclock-

wise from the center of the base with

a hex wrench. After changing the pad,

tighten the screw clockwise to secure the

pad.

Hex wrench