Makita BO6030 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita BO6030. Makita BO6030 14 pagina's. Random orbit sander
Ook voor Makita BO6030: Gebruiksaanwijzing (17 pagina's), Opsplitsing onderdelen (2 pagina's), Gebruiksaanwijzing (8 pagina's), Technische informatie (8 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (15 pagina's), Gebruiksaanwijzing (8 pagina's)

ASSEMBLY

Front grip

Install the front grip on the tool

that

its

protrusions fit into the matching notches in

the front of the tool. Secure the front grip

using a screwdriver to tighten the screw

through the hole in the front grip.

Installing or removing abrasive disc

CAUTION:

Always be sure that the tool is switched off and unplugged before installing or removing

Always use hook-and-loop system abrasive discs. Never use pressure-sensitive abrasive

the abrasive disc.

discs.

To install the abrasive disc, first remove all

dirt or foreign matter from the pad. Then

attach the abrasive disc to the pad, using

the hook-and-loop system of the abrasive

disc and the pad. Be careful to align the

holes in the abrasive disc with those in the

pad.

To remove the disc from the pad, just pull

up from its edge.

Changing pad

Makita offers an extensive range of op-

tional super soft and standard equipped

soft pads. Remove the screw counterclock-

wise from the center of the base with

a hex wrench. After changing the pad,

tighten the screw clockwise to secure the

pad.

Hex wrench