- ページ 5

電動工具 Makita BO6030のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita BO6030 13 ページ。 Random orbit sander
Makita BO6030 にも：取扱説明書 (17 ページ), 部品内訳 (2 ページ), 取扱説明書 (14 ページ), 取扱説明書 (8 ページ), 技術情報 (8 ページ), 取扱説明書 (15 ページ), 取扱説明書 (8 ページ)

ページを印刷する

FUNCTIONAL

DESCRIPTION

1. Lock button

2. Switch trigger

1. Speed adjusting dial

10000

4000

Dial setting

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool.

Switch action

003732

CAUTION:

•

Before plugging in the tool, always check to see that the switch trigger

actuates properly and returns to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Release the switch trigger to

stop.

For continuous operation, pull the switch trigger and then push in the lock but-

ton.

To stop the tool from the locked position, pull the switch trigger fully, then

release it.

Speed adjusting dial

003733

The rotating speed can be changed by turning the speed adjusting dial to a

given number setting from 1 to 5.

Higher speed is obtained when the dial is turned in the direction of number 5.

And lower speed is obtained when it is turned in the direction of number 1.

Refer to the table for the relationship between the number settings on the dial

and the approximate rotating speed.

A range: For polishing

B range: For finish sanding

C range: For regular sanding

NOTE:

003734

•

The above figure shows standard applications. They may differ under

certain conditions.