- ページ 6

電動工具 Makita BO6030のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita BO6030 13 ページ。 Random orbit sander
Makita BO6030 にも：取扱説明書 (17 ページ), 部品内訳 (2 ページ), 取扱説明書 (14 ページ), 取扱説明書 (8 ページ), 技術情報 (8 ページ), 取扱説明書 (15 ページ), 取扱説明書 (8 ページ)

ページを印刷する

ASSEMBLY

1. Notches

2. Front grip

3. Hole in front grip

4. Screwdriver

1. Abrasive disc

1. Hex wrench

2. Screw

3. Pad

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

carrying out any work on the tool.

Front grip

003738

Install the front grip on the tool so that its protrusions fit into the matching

notches in the front of the tool. Secure the front grip using a screwdriver to

tighten the screw through the hole in the front grip.

Installing or removing abrasive disc

003739

CAUTION:

•

Always use hook-and-loop system abrasive discs. Never use pressure-

sensitive abrasive discs.

To install the abrasive disc, first remove all dirt or foreign matter from the pad.

Then attach the abrasive disc to the pad, using the hook-and-loop system of

the abrasive disc and the pad. Be careful to align the holes in the abrasive disc

with those in the pad.

To remove the disc from the pad, just pull up from its edge.

Changing pad

003740

Makita offers an extensive range of optional super soft and standard equipped

soft pads. Remove the screw counterclockwise from the center of the base

with a hex wrench. After changing the pad, tighten the screw clockwise

securely.