- ページ 3

パティオ・ヒーター Garden Furniture Centre LDHR009-200KB-SのPDF 安全上のご注意と取扱説明書をオンラインで閲覧またはダウンロードできます。Garden Furniture Centre LDHR009-200KB-S 4 ページ。 Infrared

ページを印刷する

Notice：



Use 2 pieces AAA size 1.5V batteries in the remote control. Remove the battery when not use for long

time, thus the lifespan of remote control can be extended.



Choose the same specification battery when replacing the battery inside, otherwise it may cause

remote control not work , thereby affect the normal use of the heater.



Please contact service agent for further help if you need the function.



The remote control function may be out of work if there is a barrier between the remote control and

heater .



Replacing the batteries duly so as not to affect the normal use of heater and remote control.

Operation Instruction



Remove all package material (including anti‐vibration object of the lamp) and check the

appliance, supply cord and the plug for signs of damage.



Pay attention to the mounting place and all mounting material(dowels, screws). Ensure they

are suitable and stable enough for mounting and lastingly holding of the appliance.



Before mounting, the minimum safe mounting distances and tilt angles shown in the figures

must be strictly followed.



The distance between the bottom edge of the appliance and the floor must be at least 1.8 M.

See figure 2.



There must be a distance of at least 0.25 M between the appliance and the ceilings, roofs or

other covers. See figure 2.



There must be a distance of at least 0.5 M at each side between the appliance and walls or

the like. See figure 2.



Recommended degree to mounting surface is 45°. See figure 3.



Pay attention that, the installation of the appliance must not add excessive wind load.



Fix the mounting bracket to the ceiling l first. Ensure that the place to be installed is secure

and firm. Or connect the appliance to the stand.



Adjust the desired angle of radiation and fest screw all screws. Check regularly the screw's

connection. Mechanical bearing pressure and oscillation due to wind or rain could lead to

loose.



Plug in the power source and operate the remote control. Then observe, whether during the

first 10‐15 minutes the appliance works trouble‐free.



If you do not use,please remove battery socket.

Figure1: Mounting bracket and anchor dowels

provided. Connection from the wall to the infrared

heater.

Figure3: Tilt angle.

Figure2: Min. distance to floor, ceiling and wall.

Figure 4: Max.remote distance