Garden Furniture Centre LDHR009-200KB-S Инструкции по технике безопасности и руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Инструкции по технике безопасности и руководство по эксплуатации для Обогреватель патио Garden Furniture Centre LDHR009-200KB-S. Garden Furniture Centre LDHR009-200KB-S 4 страницы. Infrared
Печатать страницуNotice：
Use 2 pieces AAA size 1.5V batteries in the remote control. Remove the battery when not use for long
time, thus the lifespan of remote control can be extended.
Choose the same specification battery when replacing the battery inside, otherwise it may cause
remote control not work , thereby affect the normal use of the heater.
Please contact service agent for further help if you need the function.
The remote control function may be out of work if there is a barrier between the remote control and
heater .
Replacing the batteries duly so as not to affect the normal use of heater and remote control.
Operation Instruction
Remove all package material (including anti‐vibration object of the lamp) and check the
appliance, supply cord and the plug for signs of damage.
Pay attention to the mounting place and all mounting material(dowels, screws). Ensure they
are suitable and stable enough for mounting and lastingly holding of the appliance.
Before mounting, the minimum safe mounting distances and tilt angles shown in the figures
must be strictly followed.
The distance between the bottom edge of the appliance and the floor must be at least 1.8 M.
See figure 2.
There must be a distance of at least 0.25 M between the appliance and the ceilings, roofs or
other covers. See figure 2.
There must be a distance of at least 0.5 M at each side between the appliance and walls or
the like. See figure 2.
Recommended degree to mounting surface is 45°. See figure 3.
Pay attention that, the installation of the appliance must not add excessive wind load.
Fix the mounting bracket to the ceiling l first. Ensure that the place to be installed is secure
and firm. Or connect the appliance to the stand.
Adjust the desired angle of radiation and fest screw all screws. Check regularly the screw's
connection. Mechanical bearing pressure and oscillation due to wind or rain could lead to
loose.
Plug in the power source and operate the remote control. Then observe, whether during the
first 10‐15 minutes the appliance works trouble‐free.
If you do not use,please remove battery socket.
Figure1: Mounting bracket and anchor dowels
provided. Connection from the wall to the infrared
heater.
Figure3: Tilt angle.
Figure2: Min. distance to floor, ceiling and wall.
Figure 4: Max.remote distance