- ページ 7

DVR HIKVISION HiLook SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION HiLook Series 20 ページ。 Smart hybrid light bullet & turret camera
HIKVISION HiLook Series にも：クイック・スタート・マニュアル (18 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (13 ページ), ユーザーマニュアル (17 ページ)

You need to purchase a junction box in advance.

Steps:

1. Loosen screws to take apart the junction box.

2. Paste the drill template for junction box to the place

where you want to install the camera.

3. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

Figure 2-7 Drill Template for Junction Box

4. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

5. Secure the junction box body on the ceiling with

three PA4 × 25 screws that come with the junction

box.

Figure 2-8 Secure the Junction Box Body

6. Fix the mounting base onto the junction box cover

with two M4 × 10 screws.

7. Route the cables through the bottom cable hole or

the side cable hole of the junction box.

8. Combine the junction box cover with its body and

secure it with three M3 screws.

Figure 2-10 Combine the Junction Box Cover and Body

9. Connect the power cord and video cable and put

the cables back into the junction box.

10. Refer to step 9 of 2.1.1 Ceiling Mounting Without

Junction Box to adjust the angle and finish the

installation.

2.1.3 Wall Mounting

Before you start:

You need to purchase a wall mount in advance.

Figure 2-9 Fix the Mounting Base