HIKVISION HiLook Series 사용자 설명서 - 페이지 7
{카테고리_이름} HIKVISION HiLook Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HiLook Series 20 페이지. Smart hybrid light bullet & turret camera
HIKVISION HiLook Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (17 페이지)
페이지 인쇄
You need to purchase a junction box in advance.
Steps:
1. Loosen screws to take apart the junction box.
2. Paste the drill template for junction box to the place
where you want to install the camera.
3. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-7 Drill Template for Junction Box
4. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5. Secure the junction box body on the ceiling with
three PA4 × 25 screws that come with the junction
box.
Figure 2-8 Secure the Junction Box Body
6. Fix the mounting base onto the junction box cover
with two M4 × 10 screws.
7. Route the cables through the bottom cable hole or
the side cable hole of the junction box.
8. Combine the junction box cover with its body and
secure it with three M3 screws.
Figure 2-10 Combine the Junction Box Cover and Body
9. Connect the power cord and video cable and put
the cables back into the junction box.
10. Refer to step 9 of 2.1.1 Ceiling Mounting Without
Junction Box to adjust the angle and finish the
installation.
2.1.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Figure 2-9 Fix the Mounting Base