HIKVISION HiLook Series 사용자 설명서 - 페이지 6
{카테고리_이름} HIKVISION HiLook Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HiLook Series 20 페이지. Smart hybrid light bullet & turret camera
HIKVISION HiLook Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (17 페이지)
페이지 인쇄
3. Paste the drill template (supplied) to the place
where you want to install the camera.
4. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
5. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
6. Use two PA4 screws (supplied) to secure the
mounting base to the ceiling.
Figure 2-4 Secure the Base to the Ceiling
7. Install the camera back to the mounting base and
secure it.
Figure 2-5 Install the Camera Back
8. Connect the power cord and video cable.
9. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure
below.
Tilt Position
[0° to 75°]
Rotate the enclosure to adjust the pan position
1).
[0° to 360°].
2). Move the main body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
2.1.2 Ceiling Mounting with Junction Box
Before you start:
Figure 2-3 Drill Template
Pan Position
[0° to 360°]
Figure 2-6 3-Axis Adjustment
Rotation Position
[0° to 360°]