HIKVISION HiLook Series Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk DVR HIKVISION HiLook Series. HIKVISION HiLook Series 20 halaman. Smart hybrid light bullet & turret camera
Juga untuk HIKVISION HiLook Series: Panduan Memulai Cepat (18 halaman), Panduan Pengguna (18 halaman), Panduan Pengguna (14 halaman), Panduan Pengguna (18 halaman), Panduan Pengguna (13 halaman), Panduan Pengguna (17 halaman)

3. Paste the drill template (supplied) to the place

where you want to install the camera.

4. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

5. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

6. Use two PA4 screws (supplied) to secure the

mounting base to the ceiling.

Figure 2-4 Secure the Base to the Ceiling

7. Install the camera back to the mounting base and

secure it.

Figure 2-5 Install the Camera Back

8. Connect the power cord and video cable.

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

Tilt Position

[0° to 75°]

Rotate the enclosure to adjust the pan position

1).

[0° to 360°].

2). Move the main body up and down to adjust the

tilt position [0° to 75°].

3). Rotate the main body to adjust the rotation

position [0° to 360°].

2.1.2 Ceiling Mounting with Junction Box

Before you start:

Figure 2-3 Drill Template

Pan Position

[0° to 360°]

Figure 2-6 3-Axis Adjustment

Rotation Position

[0° to 360°]