HIKVISION HiLook Series Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla DVR HIKVISION HiLook Series. HIKVISION HiLook Series 20 stron. Smart hybrid light bullet & turret camera
Również dla HIKVISION HiLook Series: Skrócona instrukcja obsługi (18 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (14 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (17 strony)

3. Paste the drill template (supplied) to the place

where you want to install the camera.

4. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

5. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

6. Use two PA4 screws (supplied) to secure the

mounting base to the ceiling.

Figure 2-4 Secure the Base to the Ceiling

7. Install the camera back to the mounting base and

secure it.

Figure 2-5 Install the Camera Back

8. Connect the power cord and video cable.

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

Tilt Position

[0° to 75°]

Rotate the enclosure to adjust the pan position

1).

[0° to 360°].

2). Move the main body up and down to adjust the

tilt position [0° to 75°].

3). Rotate the main body to adjust the rotation

position [0° to 360°].

2.1.2 Ceiling Mounting with Junction Box

Before you start:

Figure 2-3 Drill Template

Pan Position

[0° to 360°]

Figure 2-6 3-Axis Adjustment

Rotation Position

[0° to 360°]