HIKVISION HiLook Series 사용자 설명서 - 페이지 5
{카테고리_이름} HIKVISION HiLook Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HiLook Series 20 페이지. Smart hybrid light bullet & turret camera
HIKVISION HiLook Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (17 페이지)
페이지 인쇄
1.2.3 Overview of Type III Camera
Trim Ring
Enclosure
Main Body
Mounting
Base
Figure 1-3 Overview of Type III Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
2 Installation
Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the mount.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1
Installation of Type I Camera
2.1.1 Ceiling Mounting Without Junction Box
Steps:
1. Rotate the camera to align one of the marks with
the notch, and dissemble the camera.
Figure 2-1 Align the Mark and the Notch
2. Pry the enclosure open with a flat object, for
example, a coin, to dissemble the camera.
Figure 2-2 Dissemble the Camera
Switch Button
Power Cord
IN
DC 12 V
Video Cable