- ページ 10

DVR HIKVISION HiLook SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION HiLook Series 18 ページ。 Smart hybrid light bullet & turret camera
HIKVISION HiLook Series にも：クイック・スタート・マニュアル (18 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (20 ページ), ユーザーマニュアル (13 ページ), ユーザーマニュアル (17 ページ)

1. Drill Ø10 mm screw holes in the wall where you

want to install the wall mount.

2. Use four M6 expansion bolts to fix the wall mount

onto the wall.

3. Use three M4 × 10 screws to fix the base onto the

wall mount.

4. Refer to steps 4 to 6 of 2.2.1 Ceiling Mounting

without Junction Box to finish installation.

2.3

Installation of Type III Camera

2.3.1 Ceiling Mounting Without Junction Box

Steps:

1. Insert a coin or another tool into the notch, and

press down to dissemble the camera.

2. Paste the drill template (supplied) to the place

where you want to install the camera.

3. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

4. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

5. Use two PA4 × 25 screws (supplied) to secure the

base to the ceiling.

Figure 2-13

Figure 2-14

Figure 2-15 Finish Installation

Figure 2-16

Fix Wall Mount

Fix Base

Dissemble Camera