- ページ 11
DVR HIKVISION HiLook SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION HiLook Series 18 ページ。 Smart hybrid light bullet & turret camera
HIKVISION HiLook Series にも： クイック・スタート・マニュアル (18 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (20 ページ), ユーザーマニュアル (13 ページ), ユーザーマニュアル (17 ページ)
ページを印刷する
6. Align the notch with the mark to install the camera
back to the base and secure it.
7. Connect the cables.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure
below.
4). Rotate the enclosure to adjust the pan position
[0° to 360°].
5). Move the main body up and down to adjust the
tilt position [0° to 75°].
6). Rotate the main body to adjust the rotation
position [0° to 360°].
2.3.2 Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
Loosen screws to take apart the junction box.
1.
Paste the drill template for junction box to the place
2.
where you want to install the camera.
3. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
4. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5. Secure the junction box body on the ceiling with
four PA4 × 25 screws.
Figure 2-20
Figure 2-17
Figure 2-18
Figure 2-19
Secure Junction Box Body
Secure Base to Ceiling
Install Camera Back
3-Axis Adjustment
Junction Box Body