HIKVISION HiLook Series Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HIKVISION HiLook Series. HIKVISION HiLook Series 18 pagina's. Smart hybrid light bullet & turret camera
Ook voor HIKVISION HiLook Series: Snelstarthandleiding (18 pagina's), Gebruikershandleiding (18 pagina's), Gebruikershandleiding (14 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (17 pagina's)

6. Align the notch with the mark to install the camera

back to the base and secure it.

7. Connect the cables.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

4). Rotate the enclosure to adjust the pan position

[0° to 360°].

5). Move the main body up and down to adjust the

tilt position [0° to 75°].

6). Rotate the main body to adjust the rotation

position [0° to 360°].

2.3.2 Ceiling Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

Steps:

Loosen screws to take apart the junction box.

Paste the drill template for junction box to the place

where you want to install the camera.

3. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

4. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

5. Secure the junction box body on the ceiling with

four PA4 × 25 screws.

Figure 2-20

Figure 2-17

Figure 2-18

Figure 2-19

Secure Junction Box Body

Secure Base to Ceiling

Install Camera Back

3-Axis Adjustment

Junction Box Body