- ページ 9

DVR HIKVISION HiWatch SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION HiWatch Series 15 ページ。 Hd turret and bullet camera
HIKVISION HiWatch Series にも：クイック・スタート・マニュアル (15 ページ), クイック・スタート・マニュアル (20 ページ), クイック・スタート・マニュアル (18 ページ), ハウツー (4 ページ), ユーザーマニュアル (15 ページ)

not, adjust the camera according to the figure below

to get an optimum angle.

Rotation Position

1). Rotate the enclosure to adjust the pan position

[0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

2.3 Installation of Type III Camera

Before you start:

Both wall mounting and ceiling mounting are suitable

for the dome camera. Ceiling mounting will be taken as

an example in this section. You can take steps of ceiling

mounting as a reference for wall mounting.

Steps:

1. Paste the drill template to the celling.

2. Drill screw holes and the cable hole (optional) on

the ceiling according to the supplied drill template.

Note:

Drill the cable hole, when adopting the ceiling outlet

to route the cable.

3. Loosen the screws on the bubble of the dome

camera to remove the bubble and the black liner.

Figure 2-10 Disassemble the Camera

4. Attach the mounting base to the ceiling, and secure

them with supplied screws.

Pan Position

[0° to 360°]

Figure 2-8 3-axis Adjustment

Figure 2-9 The Drill Template

Tilt Position

[0° to 75°]