HIKVISION HiWatch Series 사용자 설명서 - 페이지 9

{카테고리_이름} HIKVISION HiWatch Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION HiWatch Series 15 페이지. Hd turret and bullet camera
HIKVISION HiWatch Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (15 페이지), 빠른 시작 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (18 페이지), 방법 (4 페이지), 사용자 설명서 (15 페이지)

페이지 인쇄

not, adjust the camera according to the figure below

to get an optimum angle.

Rotation Position

1). Rotate the enclosure to adjust the pan position

[0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

2.3 Installation of Type III Camera

Before you start:

Both wall mounting and ceiling mounting are suitable

for the dome camera. Ceiling mounting will be taken as

an example in this section. You can take steps of ceiling

mounting as a reference for wall mounting.

Steps:

1. Paste the drill template to the celling.

2. Drill screw holes and the cable hole (optional) on

the ceiling according to the supplied drill template.

Note:

Drill the cable hole, when adopting the ceiling outlet

to route the cable.

3. Loosen the screws on the bubble of the dome

camera to remove the bubble and the black liner.

Figure 2-10 Disassemble the Camera

4. Attach the mounting base to the ceiling, and secure

them with supplied screws.

Pan Position

[0° to 360°]

Figure 2-8 3-axis Adjustment

Figure 2-9 The Drill Template

Tilt Position

[0° to 75°]