- ページ 2

プリンター Lexmark 3300 SeriesのPDF インストールマニュアルをオンラインで閲覧またはダウンロードできます。Lexmark 3300 Series 2 ページ。 Lexmark 3300: install guide
Lexmark 3300 Series にも：マニュアル (2 ページ)

ページを印刷する

Make sure your

computer is on.

If you are

using your

Windows

All-In-One

without a

computer,

you are

finished.

Macintosh

If you are

using your

All-In-One

with a

computer,

continue to

step 12.

Insert the CD. Follow the

instructions on your

computer screen.

Have a question?

• Refer to your User's Guide.

• Visit our Web site:

http://support.lexmark.com/.

• Call us at 1-800-332-4120.

Monday–Friday (9:00 AM–9:00 PM EST)

Saturday (Noon–6:00 PM EST)

Note: Phone number and support times may change without notice.

Registration information

Record the following information (located on your store receipt and the

back of your printer), and have it ready when you contact us so that we

may serve you faster:

Machine Type number

Serial number

Date purchased

Store where purchased

P/N 23A0170

E.C. 9E0002

Connect the USB cable.

Windows

If you inserted the CD and the installation screen did not appear:

1 Click Cancel on all New Hardware screens.

2 Eject and reinsert the All-In-One software CD.

If the All-In-One software installation screen does not appear:

a From your desktop, double-click My Computer.

(If using Windows XP, click Start

b Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.

c When the All-In-One software installation screen appears, click Install.

d Follow the instructions on the screen.

Macintosh

If you inserted the CD and the installation screen did not appear:

1 From your desktop, double-click the Lexmark 3300 Series Installer icon.

2 Double-click Install, and follow the instructions on the screen.

Need more supplies?

The following cartridge part numbers work with

your printer.

Photo

• 31

(Photo)

Important!

Click Cancel on all New Hardware screens.

Lexmark 3300 Series

Windows 2000/XP

Note: New Hardware screens appear only on Windows

systems. For Macintosh systems, continue to step 15.

My Computer.)

Black

Color

• 32

• 33

(Black)

(Color)

• 34

• 35

(Black)

(Color)

To prevent errors

Windows 98/Me

during installation:

1 Close all open

2 Temporarily disable

Lexmark 3300 Series

Setup Troubleshooting

Symptom

Diagnosis

Solution

Power light is not lit

Is the power cord pushed all

Disconnect the power cord from the

the way into the All-In-One?

wall outlet and then from the All-In-

One. Reconnect the power cord by

pushing it all the way into the power

supply on the All-In-One and then into

the wall outlet.

Is the All-In-One connected to

Connect the All-In-One to an

a working electrical outlet?

electrical outlet that other electrical

devices have been using.

Software will not

Is your operating system

The All-In-One supports these

install

compatible with the

operating systems:

Lexmark All-In-One?

• Windows 98

• Windows Me

• Windows 2000

• Windows XP

• Mac OS X version 10.2.3 and later

Alignment page or

Is the All-In-One on?

Press the Power button. If the Power

test page will not

light does not come on, see the

"Power light is not lit" symptom at the

beginning of this table.

Do you see an error

See "Error messages

message?

troubleshooting" in your User's Guide.

Is the All-In-One connected to

Disconnect the USB cable from any

your computer through

other devices and connect it directly

another device, such as a

between the All-In-One and your

USB hub or switch box?

computer. For help, see step 13.

Did you remove the sticker

Remove the print cartridges, check for

and tape from the bottom of

the sticker and tape and then reinsert

each print cartridge?

the cartriddges. For help, see steps

7, 8, and 9.

Are the print cartridges

installed properly?

Is the paper loaded correctly?

See step 6.

Control panel

Did you select a language?

1 Press the Power button to turn off

displays text in the

the All-In-One.

wrong language

2 Press and hold both the Power

and Cancel buttons for 10

seconds. Language text appears

on the display.

3 Press the + button repeatedly until

the language you want appears on

the display.

4 Press the Arrow button to select

that language.

Software

programs.

any anti-virus

software. For help,

refer to your

program

documentation, or

contact the software

manufacturer for

support.

Note: After installation

is complete,

remember to

re-enable your

anti-virus

software.