Lexmark 3300 Series Installatiehandleiding - Pagina 2
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Lexmark 3300 Series. Lexmark 3300 Series 2 pagina's. Lexmark 3300: install guide
Ook voor Lexmark 3300 Series: Handmatig (2 pagina's)
Pagina afdrukken
Make sure your
12
computer is on.
If you are
using your
Windows
All-In-One
without a
computer,
you are
finished.
Macintosh
If you are
using your
All-In-One
with a
computer,
continue to
step 12.
15
Insert the CD. Follow the
instructions on your
computer screen.
Have a question?
• Refer to your User's Guide.
• Visit our Web site:
http://support.lexmark.com/.
• Call us at 1-800-332-4120.
Monday–Friday (9:00 AM–9:00 PM EST)
Saturday (Noon–6:00 PM EST)
Note: Phone number and support times may change without notice.
Registration information
Record the following information (located on your store receipt and the
back of your printer), and have it ready when you contact us so that we
may serve you faster:
Machine Type number
Serial number
Date purchased
Store where purchased
P/N 23A0170
E.C. 9E0002
© 2005 Lexmark International, Inc. All rights reserved.
Connect the USB cable.
13
1
Windows
If you inserted the CD and the installation screen did not appear:
1 Click Cancel on all New Hardware screens.
2 Eject and reinsert the All-In-One software CD.
If the All-In-One software installation screen does not appear:
a From your desktop, double-click My Computer.
(If using Windows XP, click Start
b Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.
c When the All-In-One software installation screen appears, click Install.
d Follow the instructions on the screen.
Macintosh
If you inserted the CD and the installation screen did not appear:
1 From your desktop, double-click the Lexmark 3300 Series Installer icon.
2 Double-click Install, and follow the instructions on the screen.
Need more supplies?
The following cartridge part numbers work with
your printer.
Photo
• 31
(Photo)
Important!
14
Click Cancel on all New Hardware screens.
Lexmark 3300 Series
2
Windows 2000/XP
Note: New Hardware screens appear only on Windows
systems. For Macintosh systems, continue to step 15.
My Computer.)
Black
Color
• 32
• 33
(Black)
(Color)
• 34
• 35
(Black)
(Color)
To prevent errors
Windows 98/Me
during installation:
1 Close all open
2 Temporarily disable
Lexmark 3300 Series
Setup Troubleshooting
Symptom
Diagnosis
Solution
Power light is not lit
Is the power cord pushed all
Disconnect the power cord from the
the way into the All-In-One?
wall outlet and then from the All-In-
One. Reconnect the power cord by
pushing it all the way into the power
supply on the All-In-One and then into
the wall outlet.
Is the All-In-One connected to
Connect the All-In-One to an
a working electrical outlet?
electrical outlet that other electrical
devices have been using.
Software will not
Is your operating system
The All-In-One supports these
install
compatible with the
operating systems:
Lexmark All-In-One?
• Windows 98
• Windows Me
• Windows 2000
• Windows XP
• Mac OS X version 10.2.3 and later
Alignment page or
Is the All-In-One on?
Press the Power button. If the Power
test page will not
light does not come on, see the
print
"Power light is not lit" symptom at the
beginning of this table.
Do you see an error
See "Error messages
message?
troubleshooting" in your User's Guide.
Is the All-In-One connected to
Disconnect the USB cable from any
your computer through
other devices and connect it directly
another device, such as a
between the All-In-One and your
USB hub or switch box?
computer. For help, see step 13.
Did you remove the sticker
Remove the print cartridges, check for
and tape from the bottom of
the sticker and tape and then reinsert
each print cartridge?
the cartriddges. For help, see steps
7, 8, and 9.
Are the print cartridges
installed properly?
Is the paper loaded correctly?
See step 6.
Control panel
Did you select a language?
1 Press the Power button to turn off
displays text in the
the All-In-One.
wrong language
2 Press and hold both the Power
and Cancel buttons for 10
seconds. Language text appears
on the display.
3 Press the + button repeatedly until
the language you want appears on
the display.
4 Press the Arrow button to select
that language.
Software
programs.
any anti-virus
software. For help,
refer to your
program
documentation, or
contact the software
manufacturer for
support.
Note: After installation
is complete,
remember to
re-enable your
anti-virus
software.