- ページ 7
ワイヤレスヘッドホン Avantree HT5009のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avantree HT5009 9 ページ。 Wireless headphones and transmitter set
ページを印刷する
- 1. Table of Contents
- 2. What's in the Box
- 3. Products Overview
- 4. LED Indication & Voice Prompts
- 5. Turn on HT5009
- 6. Use HT5009 with Your
- 6. Check Your Tvs Output Options before the Set
- 6. Tvs with OPTICAL Audio out
- 6. Tvs with Aux/3.5Mm Audio out
- 6. Tvs with RCA Audio out (Red/White Ports Labeled "AUDIO OUT")
- 7. Use HT5009 with Your AV Receiver with 6.35Mm PHONE Jack
- 8. Use the Headphones Independently with Cellphone
- 8. Add a 2 Nd Pair of Bluetooth Headphones
- 9. Charging Headphones
- 10. Clear Pairing History
- 11. Troubleshooting
Use the correct RCA ports
Use HT5009 with your AV Receiver with 6.35mm PHONE jack
Make sure the "AUX" LED is on, if not, short press
NOTES:
Please do NOT use the RCA ports on the back of your AV receiver. They will not work and may permanently
damage the transmitter.
ONLY use the BIG 6.35MM PHONE OUT located in the FRONT of your AV Receiver with the
6.35mm to 3.5mm adapter (not included).
Do NOT set the volume too high.
You may test the port with wired headphones before using.
Use the headphones independently with cellphone
Step 1: Ensure the transmitter is off.
Step 2: Enter the headphones into PAIRING MODE - from its OFF state, press and hold the
the LED flashes
RED
and
BLUE
Set up Oasis Plus using 6.35mm phone jack
once to select AUX audio.
AUX
OPT
alternately, and you hear "Pairing" from the headphones.
Set TV speaker to "External Speaker"
for 5 seconds until
6