- ページ 8

ワイヤレスヘッドホン Avantree HT5009のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avantree HT5009 9 ページ。 Wireless headphones and transmitter set

Step 3: Turn on Bluetooth on your Bluetooth enabled device. Find & select "Avantree AS9S" to pair and connect.

The next time, you would like to use your headphones this way you will need to select "Avantree AS9S" on your

Bluetooth enabled device to reconnect.

Add a 2

pair of Bluetooth headphones

NOTE: Since Oasis Plus doesn't support dual-link aptX HD, we suggest that you switch to "LL" position to get

more stable connections during dual link.

Step 1: Turn on transmitter and AS9S headphones.

Step 2: Enter the transmitter into PAIRING MODE manually – press and hold

flashing

GREEN

and WHITE alternately.

Step 3: Place your 2

set of headphones into Bluetooth PAIRING MODE (Please refer to your 2

user manual).

Step 4: Keep the devices close to each other and wait. Once connected. You will hear voice prompt "Connected.

Ready for use. " Once succeeded, you will find LEDs A and B to both be lit.

For Next Use, please turn on AS9S headphone first, both headphones will auto reconnect to the transmitter

once turned on. If turn on AS9S later, please press

Please charge the headphone if you hear the " low battery" voice prompt. You may charge using a phone

charger (5V/500mA-2A output,) a PC USB port, a TV USB port, or any other USB outlet using the USB cable

provided in the box.

It takes about 3.5 hours to fully charge the headphone. The LED will turn

automatically once the charging is complete.

AUX

OPT

Hold for 2s

VOICE

AUX

OPT

once to reconnect.

for 2 seconds, "TX" LED will start

SBC

APTX

RED

while charging and will turn off

headphone's