ページを印刷する
4. How to use
Button
Function
Power on/off
Answer a call
Reject a call
MFB
End a call
Voice dialing (phone feature)
Re‐dialing
V+
Volume up
V‐
Volume down
Mute
Mute the microphone
button
Un‐mute the microphone
V+
Multipoint function on
V‐
Multipoint function off
Transfer calls during
speakerphone to mobile
V+ & V‐
phone
Note: some functions are mobile dependent and may not work with some phones. The LED will show red
during mute mode. Contact us at [email protected] for details.
5. How to pair with two mobile phone simultaneously (multipoint function)
The default setting of 10BP's multipoint function is on.
Step 1
Pair and connect 10BP with the first phone as above.
Step 2
Turn off the speakerphone. Press and hold MFB button for 7 seconds until LED flashes red and blue
alternately. Pair and connect with the second phone as above.
Step 3
Power off and power on 10BP again. Then it will automatically connect with the last 2 paired phones
6. Restore to default settings
You may need to reset 10BP if it is not working as expected. When it is reset to factory default settings, all the
paired mobile phones information will be erased.
Step1: Press and hold both V+ and V‐ for about 10 seconds until the LED flashes blue and red, then release the
buttons.
Step2: Power off 10BP. After being powered on again, it will enter pairing mode automatically.
Operation
Press and hold MFB for 4s.
Press MFB once
Press and hold MFB for 2s.
Press MFB once
Press MFB once
Double click MFB
Press V+ once
Press V‐ once
Press Mute button once (during a call)
Press Mute button once
Press and hold V + for 3 seconds
Press and hold V ‐for 3 seconds
Press V‐ and V+ together (during a call)