Avantree 10BP Kullanıcı Kılavuzu - Sayfa 2

Otomobil Aksesuarları Avantree 10BP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantree 10BP 3 sayfaları.

Sayfayı Yazdır

4. How to use

Button

Function

Power on/off

Answer a call

Reject a call

MFB

End a call

Voice dialing (phone feature)

Re‐dialing

V+

Volume up

V‐

Volume down

Mute

Mute the microphone

button

Un‐mute the microphone

V+

Multipoint function on

V‐

Multipoint function off

Transfer calls during

speakerphone to mobile

V+ & V‐

phone

Note: some functions are mobile dependent and may not work with some phones. The LED will show red

during mute mode. Contact us at [email protected] for details.

5. How to pair with two mobile phone simultaneously (multipoint function)

The default setting of 10BP's multipoint function is on.

Step 1

Pair and connect 10BP with the first phone as above.

Step 2

Turn off the speakerphone. Press and hold MFB button for 7 seconds until LED flashes red and blue

alternately. Pair and connect with the second phone as above.

Step 3

Power off and power on 10BP again. Then it will automatically connect with the last 2 paired phones

6. Restore to default settings

You may need to reset 10BP if it is not working as expected. When it is reset to factory default settings, all the

paired mobile phones information will be erased.

Step1: Press and hold both V+ and V‐ for about 10 seconds until the LED flashes blue and red, then release the

buttons.

Step2: Power off 10BP. After being powered on again, it will enter pairing mode automatically.

Operation

Press and hold MFB for 4s.

Press MFB once

Press and hold MFB for 2s.

Press MFB once

Double click MFB

Press V+ once

Press V‐ once

Press Mute button once (during a call)

Press Mute button once

Press and hold V + for 3 seconds

Press and hold V ‐for 3 seconds

Press V‐ and V+ together (during a call)