- ページ 6
パティオ・ヒーター Garden Sun HPS-CのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garden Sun HPS-C 10 ページ。
ページを印刷するSTEP 1:
Attach post with burner
assembly onto heater
housing and line up the
mounting bracket with the
screw hole. Secure them
with 4pcs 3/16" stainless
bolts. Secure the bracket
on the regulator to the
sidewall with 1pc
M5X12 bolt ,1 pc nut
M5 and 1pc washer.
Tighten the bolt and
nut on bracket.
Keep the access
panel open.
STEP 3:
Put 3pcs reflector spacers into the hole in
emitter use 3pcs nuts to firm the reflector
spacers inside of the emitter.Attach emitter
assembly to post using 4pcs bolts and
washers.
Assembly
STEP 2:
Attach ring weight to
base, using 4pcs
M6X20 bolts.
STEP 4:
Insert ends of wire
guard into holes in
the post with burner
assembly flange and
put 3pcs washers into
the top of support bolt.
STEP 6:
Rotate regulator toward
opening in housing.
Line up threads on gas
cylinder with those on
the regulator.
Insert and rotate cylinder
clockwise until tight.
STEP 5:
Attach reflector to emitter
assembly,using 3pcs nuts.
STEP 7:
Close access panel.
5