Garden Sun HPS-C 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Garden Sun HPS-C에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garden Sun HPS-C 10 페이지.

페이지 인쇄

STEP 1:

Attach post with burner

assembly onto heater

housing and line up the

mounting bracket with the

screw hole. Secure them

with 4pcs 3/16" stainless

bolts. Secure the bracket

on the regulator to the

sidewall with 1pc

M5X12 bolt ,1 pc nut

M5 and 1pc washer.

Tighten the bolt and

nut on bracket.

Keep the access

panel open.

STEP 3:

Put 3pcs reflector spacers into the hole in

emitter use 3pcs nuts to firm the reflector

spacers inside of the emitter.Attach emitter

assembly to post using 4pcs bolts and

washers.

Assembly

STEP 2:

Attach ring weight to

base, using 4pcs

M6X20 bolts.

STEP 4:

Insert ends of wire

guard into holes in

the post with burner

assembly flange and

put 3pcs washers into

the top of support bolt.

STEP 6:

Rotate regulator toward

opening in housing.

Line up threads on gas

cylinder with those on

the regulator.

Insert and rotate cylinder

clockwise until tight.

STEP 5:

Attach reflector to emitter

assembly,using 3pcs nuts.

STEP 7:

Close access panel.