- ページ 9

プリンター Lexmark C746のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Lexmark C746 14 ページ。 Setup sheet
Lexmark C746 にも：テックノート (3 ページ), 色彩品質マニュアル (6 ページ), 接続マニュアル (5 ページ), ペーパーマニュアル (4 ページ), メニューマップ (3 ページ), 印刷マニュアル (4 ページ), マニュアル (2 ページ), 用品マニュアル (2 ページ), 情報マニュアル (1 ページ), セットアップシート (2 ページ)

AKE SURE THE PHOTOCONDUCTOR IS NOT DEFECTIVE AND IS INSTALLED CORRECTLY

Remove and then reinstall the photoconductor. If the problem continues, then the photoconductor may need to be replaced.

AKE SURE THE PRINT OR TONER CARTRIDGES ARE INSTALLED CORRECTLY

NOT LOW ON TONER

•

Remove the cartridges, shake each cartridge from side to side to redistribute the toner, and then reinstall them.

Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print quality of

future print jobs.

•

Reinsert the cartridges.

Note: If the quality does not improve, then replace the cartridges.

ONTACT CUSTOMER SUPPORT

If the problem continues, then the printer may need to be serviced.

Streaked horizontal lines appear on prints

ABCDE

Try one or more of the following:

ELECT ANOTHER TRAY OR FEEDER

•

From the printer control panel, navigate to:

Paper Menu > Default Source > select a tray or feeder > Submit

•

For Windows users, select the paper source from Print Properties.

•

For Macintosh users, select the paper source from the Print dialog and pop‑up menus.

AKE SURE THERE IS NO WORN

Replace the worn, defective, or empty cartridge.

DEFECTIVE

OR EMPTY PRINT OR TONER CARTRIDGE

Print quality guide

Page 9 of 13

ARE NOT DEFECTIVE

AND