Lexmark C746 Manuel - Sayfa 9

Yazıcı Lexmark C746 için çevrimiçi göz atın veya pdf Manuel indirin. Lexmark C746 14 sayfaları. Setup sheet
Ayrıca Lexmark C746 için: Teknik Not (3 sayfalar), Renk Kalitesi Kılavuzu (6 sayfalar), Bağlantı Kılavuzu (5 sayfalar), Kağıt El Kitabı (4 sayfalar), Menü Haritası (3 sayfalar), Baskı Kılavuzu (4 sayfalar), Manuel (2 sayfalar), Sarf Malzemeleri Kılavuzu (2 sayfalar), Bilgi Kılavuzu (1 sayfalar), Kurulum Sayfası (2 sayfalar)

AKE SURE THE PHOTOCONDUCTOR IS NOT DEFECTIVE AND IS INSTALLED CORRECTLY

Remove and then reinstall the photoconductor. If the problem continues, then the photoconductor may need to be replaced.

AKE SURE THE PRINT OR TONER CARTRIDGES ARE INSTALLED CORRECTLY

NOT LOW ON TONER

•

Remove the cartridges, shake each cartridge from side to side to redistribute the toner, and then reinstall them.

Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print quality of

future print jobs.

•

Reinsert the cartridges.

Note: If the quality does not improve, then replace the cartridges.

ONTACT CUSTOMER SUPPORT

If the problem continues, then the printer may need to be serviced.

Streaked horizontal lines appear on prints

ABCDE

Try one or more of the following:

ELECT ANOTHER TRAY OR FEEDER

•

From the printer control panel, navigate to:

Paper Menu > Default Source > select a tray or feeder > Submit

•

For Windows users, select the paper source from Print Properties.

•

For Macintosh users, select the paper source from the Print dialog and pop‑up menus.

AKE SURE THERE IS NO WORN

Replace the worn, defective, or empty cartridge.

DEFECTIVE

OR EMPTY PRINT OR TONER CARTRIDGE

Print quality guide

Page 9 of 13

ARE NOT DEFECTIVE

AND