- ページ 3

プリンター Lexmark C792 FamilyのPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Lexmark C792 Family 11 ページ。 Color laser printers
Lexmark C792 Family にも: 管理者マニュアル (20 ページ), 管理者マニュアル (12 ページ), 接続マニュアル (7 ページ), リリースノート (4 ページ), 情報マニュアル (1 ページ), 管理者マニュアル (13 ページ), メンテナンス・マニュアル (12 ページ), マニュアル (11 ページ), セットアップシート (4 ページ), ペーパーマニュアル (3 ページ), 印刷マニュアル (3 ページ), 補足マニュアル (2 ページ), 印刷欠陥マニュアル (2 ページ), セットアップシート (2 ページ), データシート (8 ページ), データシート (8 ページ)

Lexmark C792 Family クイック・リファレンス
3
Flex the sheets back and forth to loosen them. Do not fold or
crease the paper. Straighten the edges on a level surface.
4
Load paper into the tray with the print side faceup.
Note: Make sure the paper is below the maximum fill line located
on the edge of the paper tray. Overloading the tray can cause
paper jams and possible printer damage.
Notes:
Place pre-punched paper with the holes toward the front of
the tray.
Place letterheads faceup with the header on the left side of
the tray.
Place letterheads facedown with the header on the right side
of the tray for duplex printing.
5
Insert the tray.

Loading the multipurpose feeder

The multipurpose feeder can hold several sizes and types of print
media, such as transparencies, labels, card stock, and envelopes. It
can be used for single-page or manual printing, or as an additional
tray.
The multipurpose feeder can hold approximately:
2
100 sheets of 75-g/m
(20-lb) paper
10 envelopes
75 transparencies
The multipurpose feeder accepts paper or specialty media within the
following dimensions:
Width—89 mm (3.5 in.) to 229 mm (9.02 in.)
Length—127 mm (5 in.) to 1270 mm (50 in.)
3
Note: Maximum width and length can be applied only to short-edge
feeding.
Note: Do not add or remove paper or specialty media when the
printer is printing from the multipurpose feeder or when the printer
control panel indicator light is blinking. Doing so may cause a jam.
1
Pull down the multipurpose feeder door.
2
For paper or specialty media that is longer than letter-size paper,
gently pull the extension until it is fully extended.