Lexmark C792 Family Краткая справка - Страница 3

Flex the sheets back and forth to loosen them. Do not fold or

crease the paper. Straighten the edges on a level surface.

Load paper into the tray with the print side faceup.

Note: Make sure the paper is below the maximum fill line located

on the edge of the paper tray. Overloading the tray can cause

paper jams and possible printer damage.

Notes:

•

Place pre-punched paper with the holes toward the front of

the tray.

•

Place letterheads faceup with the header on the left side of

the tray.

•

Place letterheads facedown with the header on the right side

of the tray for duplex printing.

Insert the tray.

Loading the multipurpose feeder

The multipurpose feeder can hold several sizes and types of print

media, such as transparencies, labels, card stock, and envelopes. It

can be used for single-page or manual printing, or as an additional

tray.

The multipurpose feeder can hold approximately:

•

100 sheets of 75-g/m

(20-lb) paper

•

10 envelopes

•

75 transparencies

The multipurpose feeder accepts paper or specialty media within the

following dimensions:

•

Width—89 mm (3.5 in.) to 229 mm (9.02 in.)

•

Length—127 mm (5 in.) to 1270 mm (50 in.)

Note: Maximum width and length can be applied only to short-edge

feeding.

Note: Do not add or remove paper or specialty media when the

printer is printing from the multipurpose feeder or when the printer

control panel indicator light is blinking. Doing so may cause a jam.

Pull down the multipurpose feeder door.

For paper or specialty media that is longer than letter-size paper,

gently pull the extension until it is fully extended.