IP電話 Avaya E169のPDF 使用方法をオンラインで閲覧またはダウンロードできます。Avaya E169 2 ページ。 Using the avaya e169 media station as a bluetooth speakerphone
Avaya E169 にも：クイック・リファレンス (10 ページ)

ページを印刷する

Using the Avaya E169 Media

Station as a Bluetooth

Speakerphone

Introduction

Use this quick guide to set up your Avaya E169 IP Media

Station as a Bluetooth speakerphone for your smart

device. This guide contains the following information:

• How to assemble the media station.

• How to pair your smart device using Bluetooth.

• How to reset the media station to factory defaults.

• How to get additional support for the media station.

Important:

For detailed assembly procedures, user procedures,

and regulatory information for the Avaya E169 IP

Media Station, see Using the Avaya E169 IP Media

Station.

Avaya E169 IP Media Station parts

Assembling the media station

1. Remove the parts from the shipping box. Confirm that

you have all required parts.

2. Remove any transparent protective film or packing

materials from the parts.

3. (Optional) If you want to use the media station to also

charge your smartphone, perform the following steps:

a. Select the USB cable and cable sleeve that

matches your device.

March 2016

2016, Avaya, Inc.

b. Assemble the USB cable and cable sleeve. The

following example shows the Apple lightening

cable and cable sleeve.

c. Insert the cable sleeve into the slot from the top

of the media station. Use the following diagram to

ensure you have the cable sleeve inserted

correctly.

d. Route the USB cable under the media station and

through the cable channels.

e. Plug the USB connector of the cable into the left

USB port at the rear of the media station.

f. Insert the docking cradle into the base that

matches the USB cable that you are using. If your

smartphone has a case that does not fit in the

cradle, do not install the cradle.

4. (Optional) If you want to use the media station to also

charge your tablet, perform the following steps:

a. Install the tablet bracket. Ensure that the tablet

bracket snaps in all the way in at the bottom of

the bracket. When properly installed, the bracket

will be at an angle to the media station base.

b. Connect the USB cable to the tablet. You can

route the cable through the tablet bracket.

c. Plug the USB cable into the left USB connector

on the rear of the media station.

5. Plug the AC power adapter into the AC connector on

the rear of the media station and into a wall mount

socket.

6. Press the power button on the back of the media

station to power up the unit.