Avaya E169 Instructies

Blader online of download pdf Instructies voor {categorie_naam} Avaya E169. Avaya E169 2 pagina's. Using the avaya e169 media station as a bluetooth speakerphone
Ook voor Avaya E169: Snelle referentie (10 pagina's)

Avaya E169 Instructies
Using the Avaya E169 Media
Station as a Bluetooth
Speakerphone
Introduction
Use this quick guide to set up your Avaya E169 IP Media
Station as a Bluetooth speakerphone for your smart
device. This guide contains the following information:
• How to assemble the media station.
• How to pair your smart device using Bluetooth.
• How to reset the media station to factory defaults.
• How to get additional support for the media station.
Important:
For detailed assembly procedures, user procedures,
and regulatory information for the Avaya E169 IP
Media Station, see Using the Avaya E169 IP Media
Station.
Avaya E169 IP Media Station parts
Assembling the media station
1. Remove the parts from the shipping box. Confirm that
you have all required parts.
2. Remove any transparent protective film or packing
materials from the parts.
3. (Optional) If you want to use the media station to also
charge your smartphone, perform the following steps:
a. Select the USB cable and cable sleeve that
matches your device.
March 2016
©
2016, Avaya, Inc.
All Rights Reserved.
b. Assemble the USB cable and cable sleeve. The
following example shows the Apple lightening
cable and cable sleeve.
c. Insert the cable sleeve into the slot from the top
of the media station. Use the following diagram to
ensure you have the cable sleeve inserted
correctly.
d. Route the USB cable under the media station and
through the cable channels.
e. Plug the USB connector of the cable into the left
USB port at the rear of the media station.
f. Insert the docking cradle into the base that
matches the USB cable that you are using. If your
smartphone has a case that does not fit in the
cradle, do not install the cradle.
4. (Optional) If you want to use the media station to also
charge your tablet, perform the following steps:
a. Install the tablet bracket. Ensure that the tablet
bracket snaps in all the way in at the bottom of
the bracket. When properly installed, the bracket
will be at an angle to the media station base.
b. Connect the USB cable to the tablet. You can
route the cable through the tablet bracket.
c. Plug the USB cable into the left USB connector
on the rear of the media station.
5. Plug the AC power adapter into the AC connector on
the rear of the media station and into a wall mount
socket.
6. Press the power button on the back of the media
station to power up the unit.
1