- ページ 6
プリンター Lexmark C950 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Lexmark C950 Series 13 ページ。 Lexmark c950 printer - print defects guide
Lexmark C950 Series にも: 接続マニュアル (7 ページ), セットアップマニュアル (2 ページ), ペーパーマニュアル (3 ページ), メニューマップ (2 ページ), 引越しマニュアル (2 ページ), 情報マニュアル (1 ページ), 印刷欠陥マニュアル (1 ページ)
T
HE TONER MAY BE LOW
When 88 Cartridge Low appears or when the print becomes faded, replace the toner cartridge.
T
HE FUSER MAY BE WORN OR DEFECTIVE
Replace the fuser.
Repeating defects appear on a page
Try one or more of the following:
M
AKE SURE THE PHOTOCONDUCTOR UNIT IS NOT DEFECTIVE
The photoconductor unit may be defective if marks occur repeatedly in only one color and multiple times on a page.
•
Replace the photoconductor unit if the defects occur every 94.2 mm (3.71 in.) or 37.68 mm (1.48 in.).
M
AKE SURE THE FUSER IS NOT DEFECTIVE
The fuser may be defective if the marks occur down repeatedly in all colors.
•
Replace the fuser if the defects occur every 141 mm (5.55 in.).
Skewed print
Try one or more of the following:
C
HECK THE PAPER GUIDES
Adjust the length and width guides in the tray to the correct positions for the paper size loaded.
•
Make sure the guides are not too far from the paper stack.
•
Make sure the guides are not pressing too lightly against the paper stack.
C
HECK THE PAPER
Make sure you are using paper that meets the printer specifications.
M
AKE SURE THE PRINTER IS CLEAN OR IS NOT CONTAMINATED WITH PAPER DUST
Clean the exterior of the printer
1
Make sure that the printer is turned off and unplugged from the wall outlet.
Warning—Potential Damage: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power
cord from the wall outlet and disconnect all cables to the printer before proceeding.
2
Remove paper from the standard exit bin.
3
Dampen a clean, lint-free cloth with water.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of the printer.
Print quality guide
Page 6 of 12