- ページ 12

IP電話 Avaya INDEX 4602のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Avaya INDEX 4602 16 ページ。 Index 4602 ip telephone
Avaya INDEX 4602 にも：インストレーション・マニュアル (16 ページ)

ページを印刷する

Creating the DHCP Scope:Page 12 - Contents

Creating the DHCP Scope:

The creation of DHCP Scopes should only be performed by System

Administrators with Administrator rights.

DHCP scopes are configured using the DHCP MMC snap-in as follows:

1. Start the DHCP MMC snap-in (Start/Programs/Administrative Tools/DHCP)

2. Right click on the server and select New - Scope from the context menu

3. The scope creation Wizard will be started. Click Next

4. Enter a name and description for the scope. Click Next

5. Enter the address range to use, for example from 200.200.200.1 to

6. You can specify addresses to be excluded either by range, e.g.

Page 12

Contents

200.200.200.15 (remember the host part cannot be 0). Also enter the

subnet mask as either the number of bits used or the actual mask, e.g. 24 is

the same as 255.255.255.0. Click Next

200.200.200.5 to 200.200.200.7 and click Add, or just enter a Start address

and click Add, e.g. 200.200.200.12 to exclude a single address. Click Next

NOTE: You should exclude the IP Office from this range, as the DHCP

Options in the IP Office should be disabled. This is only a

recommendation. You can also accomplish this by leaving available

addresses outside of the scopes range.

INDeX 4602 IP Telephone Installation Manual

38DHB0002UKCQ – Issue 2 (11/06/2003)