Avaya INDEX 4602 설치 매뉴얼 - 페이지 12

{카테고리_이름} Avaya INDEX 4602에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya INDEX 4602 16 페이지. Index 4602 ip telephone
Avaya INDEX 4602에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄
Avaya INDEX 4602 설치 매뉴얼
Creating the DHCP Scope:Page 12 - Contents

Creating the DHCP Scope:

The creation of DHCP Scopes should only be performed by System
Administrators with Administrator rights.
DHCP scopes are configured using the DHCP MMC snap-in as follows:
1. Start the DHCP MMC snap-in (Start/Programs/Administrative Tools/DHCP)
2. Right click on the server and select New - Scope from the context menu
3. The scope creation Wizard will be started. Click Next
4. Enter a name and description for the scope. Click Next
5. Enter the address range to use, for example from 200.200.200.1 to
6. You can specify addresses to be excluded either by range, e.g.
Page 12
Contents
200.200.200.15 (remember the host part cannot be 0). Also enter the
subnet mask as either the number of bits used or the actual mask, e.g. 24 is
the same as 255.255.255.0. Click Next
200.200.200.5 to 200.200.200.7 and click Add, or just enter a Start address
and click Add, e.g. 200.200.200.12 to exclude a single address. Click Next
NOTE: You should exclude the IP Office from this range, as the DHCP
Options in the IP Office should be disabled. This is only a
recommendation. You can also accomplish this by leaving available
addresses outside of the scopes range.
INDeX 4602 IP Telephone Installation Manual
38DHB0002UKCQ – Issue 2 (11/06/2003)