- ページ 7

水ポンプ Gardena 19500 AquaSensorのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena 19500 AquaSensor 12 ページ。 Clear/dirty water submersible pump

ページを印刷する

After disconnecting the power supply, the pump auto matically switches

back to automatic operation.

To return to the automatic mode again, push and hold the 2 sensor

fields

and

simultaneously until the double flashing of all LEDs has

acknowledged the input.

To change the function mode:

The pump can be switched between clear water and dirty water.

To do this, the pedestal is extended or retracted.

To extend the pedestal (dirty water) [ Fig. O2 – O5 ]:

1. Take the pump out of the water [ Fig. O2 ].

2. Lift up the pump and push the button

extended [ Fig. O3 ].

3. If the pedestal does not extend completely, stand with your feet on

the wings of the stand and pull the pump upwards [ Fig. O4 ].

(6)

4. Release the button

again before you put the pump back down

[ Fig. O5 ].

The max. delivery rate is achieved with the pedestal extended.

The pedestal is correctly locked in position when the button is fully

extended. If the button is not fully extended, repeat the process.

To retract the pedestal (clear water) [ Fig. O6 – O9 ]:

1. Take the pump out of the water [ Fig. O6 ].

2. Place the pump on a firm surface and push the button

3. Push the pump down until the pedestal

the handle [ Fig. O8 ].

4. To lock, push the pump down until the button

[ Fig. O9 ].

5. When submerging the pump again, make sure that it is on a firm

surface so that it cannot get stuck (e. g. foil).

The minimum residual water depth (see 7. TECHNICAL DATA) is only

achieved with the pedestal retracted in manual mode.

For best possible suction, we recommend switching to clear water mode

when the water level has reached the turquoise ring.

4. MAINTENANCE

DANGER! Risk of physical injury!

Injury when the product starts accidentally.

v Disconnect the product from the mains before you maintain

the product.

To clean the pump:

DANGER! Risk of physical injury!

Risk of injury and risk of damage to the product.

v Do not clean the product with a water jet (in particular

high-pressure water jet).

v Do not clean with chemicals including petrol or solvents.

Some can destroy critical plastic parts.

v Clean the surface of the pump with a damp cloth.

To flush the pump:

After pumping water containing chlorine, detergents or heavily soiled

water, the pump must be flushed.

1. Pump lukewarm water (max. 35 °C), possibly adding a mild cleaning

agent (e. g. detergent) until the pumped water runs clear.

2. Flush the button if the water is very dirty.

3. Remove residuals according to the waste disposal laws applicable in

your area.

To clean the button [ Fig. M1 ]:

If the button gets stuck due to dirt, it can be cleaned.

(13)

1. Push in the two lockings

(6)

2. Pull off the button

(6)

3. Clean the button

, the lockings

water.

(6)

4. Reassemble the button

in reverse order.

(6)

until the pedestal

(7)

is fully

(6)

[ Fig. O7 ].

(7)

is fully retracted and release

(6)

is fully extended again

(13)

and the handle under running

5. STORAGE

To put into storage:

The pump is not frost-proof!

The product must be stored away from children.

1. Disconnect the pump from the mains.

2. Turn the pump upside down until no more water runs out.

3. Clean the pump (see 4. MAINTENANCE).

4. Store the pump in a dry, enclosed and frost-free place.

Disposal:

(in accordance with RL2012/19/EC)

The product must not be disposed of to normal household

waste. It must be disposed of in line with local environmental

regulations.

IMPORTANT!

v Dispose of the product through or via your municipal recycling

collection centre.

6. TROUBLESHOOTING

DANGER! Risk of physical injury!

Injury when the product starts accidentally.

v Disconnect the product from the mains before you trouble-

shoot the product.

To clean the pedestal and the impeller [ Fig. T1 / T2 ]:

If the pedestal cannot be changed according to the chapter

3. OPERATION To change the function mode, the pedestal must

be cleaned.

1. Unscrew the 4 Phillips screws

(9)

2. Pull the suction base

off the pump.

3. Unscrew the 4 Phillips screws

4. Pull the pedestal

(7)

off the suction base

5. Clean the pedestal

(7)

, the suction base

(the warranty does not become void as a result of this maintenance

work).

(14)

6. Clean the sealings

carefully to avoid damage and leakage.

(7)

7. Reassemble the pedestal

and the suction base

Make sure that the 4 springs

(12)

(7)

pedestal

A damaged seal must be replaced.

For safety reasons a damaged impeller can only be exchanged

by the GARDENA Service Centre.

Problem

Possible Cause

Pump is running, but

Air cannot escape, because

doesn't deliver water

the pressure line is closed.

(Possible kink in the pressure

hose.)

Air in suction foot.

All LEDs and

blink

Impeller is blocked.

alternately

All LEDs and

blink

Suction opening is clogged.

alternately

Hose is clogged.

Water level below minimum

water level when put into

operation.

All LEDs and

blink

Sensor is dirty.

alternately

All LEDs and

blink

Time is exceeded.

alternately

Pump does not start or

Thermal switch has turned

stops suddenly during

the pump off because of over-

operation

heating.

Pumping without electricity.

(8)

(10)

(9)

and the impeller

(11)

(9)

in reverse order.

are fitted on the domes

(15)

of the

Remedy

v Open the pressure line

(e. g. shut-off valve, delivery

units).

v Wait for about 3 minutes

until the pump has vented;

if necessary, turn off and

then on again.

v Clean the pedestal and the

impeller.

v Clean the suction opening

with a water jet.

v Remove the clog from the

hose.

v Submerge the pump deeper.

v Clean the sensor.

v Place the pump in water

within the countdown.

v Clean the suction opening.

Observe the max. media

temperature (35 °C).

v Check fuses and electrical

plug connections.