- ページ 8

トリマー Gardena EasyCut 400/25のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gardena EasyCut 400/25 15 ページ。 Turbotrimmer
Gardena EasyCut 400/25 にも：取扱説明書 (9 ページ)

Replacing the filament

cassette:

Risk of injury!

v N ever use metallic cutting elements or replacement

parts and accessories not provided by GARDENA.

Only use original GARDENA Filament Cassettes. You can

order Replacement Filament Cassettes from your GARDENA

dealer or directly from the GARDENA Customer Service.

• for Art. 9807 EasyCut 400/25:

GARDENA Filament Cassette for Turbotrimmers

1. Press in cassette cover

time and remove.

2. Remove the filament cassette

3. Remove any dirt.

4. Pull approximately 15 cm of the cutting filament

new filament cassette

5. First thread the cutting filament

6. Thread the cutting filament

7. Insert the filament cassette

holder

8. Fit the cassette cover

so that you hear both locking clips

When fitting the cassette cover

be placed around the guide pin

v If the cassette cover

filament cassette

is completely in the filament cassette holder

on the two catches

through the hole in the plastic ring

around the guide pin

into the filament cassette

on the filament cassette holder

cannot be touched down, turn the

to and fro, until the filament cassette

at the same

out of the

through the metal sleeve

click into place.

, the cutting filament

and must not be trapped.

Art. 5307

must