Gardena EasyCut 400/25 Operating Instructions Manual - Page 8
Browse online or download pdf Operating Instructions Manual for Trimmer Gardena EasyCut 400/25. Gardena EasyCut 400/25 15 pages. Turbotrimmer
Also for Gardena EasyCut 400/25: Operator's Manual (9 pages)
Print Page
Replacing the filament
cassette:
f
g
g
h
18
Risk of injury!
v N ever use metallic cutting elements or replacement
parts and accessories not provided by GARDENA.
d
Only use original GARDENA Filament Cassettes. You can
order Replacement Filament Cassettes from your GARDENA
f
dealer or directly from the GARDENA Customer Service.
• for Art. 9807 EasyCut 400/25:
GARDENA Filament Cassette for Turbotrimmers
1. Press in cassette cover
time and remove.
2. Remove the filament cassette
3. Remove any dirt.
4. Pull approximately 15 cm of the cutting filament
new filament cassette
5. First thread the cutting filament
6. Thread the cutting filament
7. Insert the filament cassette
holder
l
8. Fit the cassette cover
so that you hear both locking clips
k
p
When fitting the cassette cover
j
be placed around the guide pin
v If the cassette cover
filament cassette
is completely in the filament cassette holder
l
on the two catches
d
g
through the hole in the plastic ring
g
around the guide pin
p
into the filament cassette
g
.
on the filament cassette holder
d
d
k
cannot be touched down, turn the
d
to and fro, until the filament cassette
g
at the same
f
.
out of the
p
through the metal sleeve
p
.
k
click into place.
f
, the cutting filament
p
and must not be trapped.
.
l
Art. 5307
.
h
.
j
l
must
g