ページを印刷する
Watering program
do not run.
Watering program
run at the wrong
time.
Battery flat after
working for a
short time.
Device not working.
If you have any problems with your Water Timer, please contact our
Customer Service or return the defective unit together with a short de-
scription of the problem directly to one of the GARDENA Service Centres
listed on the back of this leaflet.
If covered under warranty, please include the completed and signed
warranty card.
Disposal
(in accordance with RL 2002 / 96 / EC)
The product must not be added to normal household waste.
It must be disposed of in line with local environmental
regulations.
We expressly point out that, in accordance with the product liability
law, we are not liable for any damage caused by our units if it is due
to improper repair or if parts exchanged are not original GARDENA
parts or parts approved by us, and, if the repairs were not carried
out by a GARDENA Service Centre or an authorised specialist.
The same applies to spare parts and accessories.
Connected Soil
Moisture Sensor /
Rain Sensor indicates
adequate amount of
moisture.
Water timer has
been reset.
Not an alkaline
battery.
Battery inserted
incorrectly.
Battery is flat.
Check the moisture
level setting on the
Soil Moisture Sensor.
Determine the new
starting time. Set the
starting time (see
"Setting the watering
data").
Use an alkaline
battery.
Observe the
+ / – markings.
Insert a new alkaline
battery.
15