- ページ 7

プリンター Lexmark Monochrome LaserのPDF 接続マニュアルをオンラインで閲覧またはダウンロードできます。Lexmark Monochrome Laser 19 ページ。 Maintenance guide
Lexmark Monochrome Laser にも： ユーザーマニュアル (6 ページ), 仕様書 (1 ページ), 補足マニュアル (5 ページ), 紙詰まりの解消 (2 ページ), ジャム除去マニュアル (2 ページ), 印刷マニュアル (17 ページ), 更新 (1 ページ), 接続マニュアル (5 ページ), 情報マニュアル (1 ページ), クイック・リファレンス (1 ページ), メンテナンス・マニュアル (11 ページ), 設置シート (1 ページ), メンテナンス・マニュアル (10 ページ)

ページを印刷する
Lexmark Monochrome Laser 接続マニュアル

Moving the printer

Follow these guidelines to move the printer to another location.
CAUTION: The base printer weighs 49 kg (108 lb). It requires at least two (2) people to lift it safely. Use the
printer handholds to lift it, and make sure your fingers are not under the printer when you set it down.
CAUTION: Follow these guidelines to avoid injuring yourself or damaging the printer:
• Always use at least two people to lift the printer.
• Always turn off the printer using the power switch before moving it.
• Disconnect the power cord from the wall before disconnecting it from the printer.
• Disconnect all cords and cables from the printer before moving it.
• Remove all printer options before moving the printer. Place the options in the original packaging.
Note: Damage to the printer caused by improper moving is not covered by the printer warranty.
Moving the printer and options to another location
When the optional 500-sheet trays or the 850+1150-sheet dual input drawer is attached, the printer can be rolled
along a flat surface, as these options have casters on the bottom. However, if the printer must be moved over an
uneven surface, it should first be lifted away from these options prior to moving.
The printer and options can be safely moved to another location by following these precautions:
• Keep the printer in an upright position.
• Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any
cart used to move the options must have a surface able to support the dimensions of the options.
• Severe jarring movements may cause damage to the printer and options, and must be avoided.
Moving the printer
Page 1 of 1