Lexmark Monochrome Laser Instrukcja połączenia - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja połączenia dla Drukarka Lexmark Monochrome Laser. Lexmark Monochrome Laser 19 stron. Maintenance guide
Również dla Lexmark Monochrome Laser: Podręcznik użytkownika (6 strony), Arkusz specyfikacji (1 strony), Podręcznik uzupełniający (5 strony), Usuwanie zacięć papieru (2 strony), Instrukcja usuwania zacięć (2 strony), Podręcznik drukowania (17 strony), Aktualizacja (1 strony), Instrukcja połączenia (5 strony), Podręcznik informacyjny (1 strony), Skrócona instrukcja obsługi (1 strony), Podręcznik konserwacji (11 strony), Arkusz instalacyjny (1 strony), Podręcznik konserwacji (10 strony)

Drukuj stronę
Lexmark Monochrome Laser Instrukcja połączenia

Moving the printer

Follow these guidelines to move the printer to another location.
CAUTION: The base printer weighs 49 kg (108 lb). It requires at least two (2) people to lift it safely. Use the
printer handholds to lift it, and make sure your fingers are not under the printer when you set it down.
CAUTION: Follow these guidelines to avoid injuring yourself or damaging the printer:
• Always use at least two people to lift the printer.
• Always turn off the printer using the power switch before moving it.
• Disconnect the power cord from the wall before disconnecting it from the printer.
• Disconnect all cords and cables from the printer before moving it.
• Remove all printer options before moving the printer. Place the options in the original packaging.
Note: Damage to the printer caused by improper moving is not covered by the printer warranty.
Moving the printer and options to another location
When the optional 500-sheet trays or the 850+1150-sheet dual input drawer is attached, the printer can be rolled
along a flat surface, as these options have casters on the bottom. However, if the printer must be moved over an
uneven surface, it should first be lifted away from these options prior to moving.
The printer and options can be safely moved to another location by following these precautions:
• Keep the printer in an upright position.
• Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any
cart used to move the options must have a surface able to support the dimensions of the options.
• Severe jarring movements may cause damage to the printer and options, and must be avoided.
Moving the printer
Page 1 of 1