- ページ 4
電話 Avaya EA401のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Avaya EA401 20 ページ。 Avaya explosive atmosphere telephone installation & operation manual
ページを印刷するAvaya Inc.
MAGNETIC REED
HOOK SWITCH
HANDSET CORD
(PBX TRANSFER)
HANDSET CORD
CONNECTOR
TELEPHONE FOR USE IN HAZARDOUS LOCATIONS
[Exia]
Associated equipment
Appareillage Connexe
LR65547
FUSE: 0.25A 48VDC - TYPE 2AG, FAST-ACTING
COMCODE: 700302045
SER. NO.
REFER TO USER GUIDE FOR INSTALLATION
LINK
FIELD REPAIR NOT POSSIBLE. FOR SERVICE RETURN TO FACTORY. TO PREVENT
IGNITION OF HAZARDOUS ATMOSPHERE, DISCONNECT FROM THE SUPPLY CIRCUIT
BEFORE OPENING OR REPLACING FUSE. KEEP TIGHTLY CLOSED WHEN CIRCUITS
ARE ALIVE. ALL CONDUIT RUNS MUST BE SEALED WITHIN 18 INCHES (450 mm) OF
THIS ENCLOSURE. BREAKING OF REAR BOLT SEALS VOIDS MANUFACTURER'S
WARRANTY. SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY.
CET APPAREIL NE PEUT ETRE REPARE A PIED D'OEUVRE. NE PAS L'OUVRIR.
LES BOULONS DOIVENT ETRE BIEN SERRES DEBRANCHE LE TELEPHONE
AVANT LE REMPLACEMENT DU FUSIBLE. RETOURNER L'APPAREIL A L'USINE
POUR LE DEPANNAGE. LE FAIT DE BRISER LE SCEAU DU FABRICANT A
L'ARRIERE DE L'APPAREIL ANNUELE LA GUARANTIE DU FABRICANT.
Figure 1 - Features
Ø0.4" [Ø10mm]
10.1" [257mm]
2 PLCS.
8.5" [216mm]
AVAYA
TELEPHONE FOR USE IN HAZARDOUS LOCATIONS
CLASS I GROUPS B, C, & D
[Exia]
Associate d eq uipment
CLASS I ZONE 1, GROUPS IIB+H2
Appa reillage Connexe
CLASS II GROUPS E, F, & G
LISTED
ENCLOSURE TYPE 4
RECEPTACLE PROVIDES
INTRINSICALLY SAFE OUTPUT
USE ONLY MODEL 301SC OR 301SCPB
LR65547
HANDSET WITH THIS TELEPHONE
13X8
RELAY CONTACTS
10A 1/3HP 240V AC
10A 1/3HP 120V AC
10A
3 0V DC
FUSE: 0.25A 48VDC - TYPE 2AG, FAST-ACTING
SER . NO.
C AT. NO .: 401
REFER TO USER GUIDE FOR INSTALLATION
M ADE IN CANADA
WARNING
FIELD REPAIR NOT POSSIBLE. FOR SERVICE RETURN TO FACTORY. TO PREVENT
IGNITION OF HAZARDOUS ATMOSPHERE, DISCONNECT FROM THE SUPPLY CIRCUIT
BEFORE OPENING OR REPLACING FUSE. KEEP TIGHTLY CLOSED WHEN CIRCUITS
ARE ALIVE. ALL CONDUIT RUNS MUST BE SEALED WITHIN 18 INCHES (450 mm) OF
THIS ENCLOSURE. BREAKING OF REAR BOLT SEALS VOIDS MANUFACTURER'S
WARRANTY. SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY.
ATTENTION
CET APPAREIL NE PEUT ETRE REPARE A PIED D'OEUVRE. NE PAS L'OUVRIR.
LES BOULONS DOIVENT ETRE BIEN SERRES DEBRANCHE LE TELEPHONE
AVANT LE REMPLACEMENT DU FUSIBLE. RETOURNER L'APPAREIL A L'USINE
POUR LE DEPANNAGE. LE FAIT DE BRISER LE SCEAU DU FABRICANT
A
L'ARRIERE DE L'APPAREIL ANNUELE LA GUARANTIE DU FABRICANT.
Industry Canada
Industrie Canada
1012 4339 A
Figure 2 - Dimensions
INTRINSICALLY SAFE
AVAYA
HANDSET
CLASS I GROUPS B, C, & D
CLASS I ZONE 1, GROUPS IIB+H2
LISTED
CLASS II GROUPS E, F, & G
ENCLOSURE TYPE 4
RECEPTACLE PROVIDES
INTRINSICALLY SAFE OUTPUT
USE ONLY MODEL EA10H
HANDSET WITH THIS TELEPHONE
13X8
RELAY CONTACTS
10A 1/3HP 240V AC
10A 1/3HP 120V AC
PRODUCTION IDENTIFICATION
10A
30V DC
MOD. NO.: EA401
MADE IN CANADA
LABEL
KEYPAD
REDIAL
RELEASE
WARNING
WARNING LABEL
ATTENTION
Industry Canada
Industrie Canada
1012 4339 A
MOUNTING LUG
TIP/RING/GROUND WIRES
ENTRY POINT
FUSE
4.4" [111mm]
AVAYA
TELEPHONE FOR USE IN HAZARDOUS LOCATIONS
CLASS I GROUPS B, C, & D
[Exia]
Associate d equipment
CLASS I ZONE 1, GROUPS IIB+H2
Apparei llage Connexe
CLASS II GROUPS E, F, & G
LISTED
ENCLOSURE TYPE 4
RECEPTACLE PROVIDES
INTRINSICALLY SAFE OUTPUT
USE ONLY MODEL 301SC OR 301SCPB
LR65547
HANDSET WITH THIS TELEPHONE
13X8
RELAY CONTACTS
1 0A 1/3 HP 240V AC
1 0A 1/3 HP 120V AC
1 0A
30V DC
FUSE: 0.25A 48VDC - TYPE 2AG, FAST-ACTING
SER. NO.
CAT. NO.: 401
REFER TO USER GUIDE FOR INSTALLATION
MADE IN CANADA
WARNING
FIELD REPAIR NOT POSSIBLE. FOR SERVICE RETURN TO FACTORY. TO PREVENT
IGNITION OF HAZARDOUS ATMOSPHERE, DISCONNECT FROM THE SUPPLY CIRCUIT
BEFORE OPENING OR REPLACING FUSE. KEEP TIGHTLY CLOSED WHEN CIRCUITS
ARE ALIVE. ALL CONDUIT RUNS MUST BE SEALED WITHIN 18 INCHES (450 mm) OF
THIS ENCLOSURE. BREAKING OF REAR BOLT SEALS VOIDS MANUFACTURER'S
WARRANTY. SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY.
ATTENTION
CET APPAREIL NE PEUT ETRE REPARE A PIED D'OEUVRE. NE PAS L'OUVRIR.
LES BOULONS DOIVENT ETRE BIEN SERRES DEBRANCHE LE TELEPHONE
AVANT LE REMPLACEMENT DU FUSIBLE. RETOURNER L'APPAREIL A L'USINE
POUR LE DEPANNAGE. LE FAIT DE BRISER LE SCEAU DU FABRICANT
A
L'ARRIERE DE L'APPAREIL ANNUELE LA GUARANTIE DU FABRICANT.
Industry Canada
Industrie Canada
1012 4339 A
4.6" [117mm]
Page 4
Installation and Operation
4.9" [124mm]
Ø0.3" [Ø9mm]
2 PLCS.
Model EA401