- ページ 16

おもちゃ Alien Aircraft Corp Hornet K-107のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Alien Aircraft Corp Hornet K-107 17 ページ。

63...Attach parts LG to the back of the landing gear wires with a small

amount of C/A. Wrap a 1/2" wide strip of covering material around

the front of the landing gear wire and iron into position to secure parts

LG to the landing gear wire.

64...Put the wheels on the model and press the wheel retainers into

position. With the retainers in place, cut off the excess wire axle flush

with the retainer.

65...Secure the motor mount to the front of the motor with the four

flat head screws. Now bolt the motor to the firewall with 4-40 screws

and aluminum tube spacers. Note: Because the wires on the motor

are short, pass the wires from the speed controller thru the firewall

and attach to the motor before mounting the motor to the firewall.

66...Secure the speed controller to the fuselage with velcro. The

speed control can be mounted on the fuselage side or on the front of

former F-4.

67...Plug the speed control and servos into the receiver and attach the

receiver to the fuselage side with velcro. Pass the receiver antenna

back and out through the rear of the fuselage.

Page 15