Alien Aircraft Corp Hornet K-107 Montaj Talimatları Kılavuzu - Sayfa 16
Oyuncak Alien Aircraft Corp Hornet K-107 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Alien Aircraft Corp Hornet K-107 17 sayfaları.
Sayfayı Yazdır
63...Attach parts LG to the back of the landing gear wires with a small
amount of C/A. Wrap a 1/2" wide strip of covering material around
the front of the landing gear wire and iron into position to secure parts
LG to the landing gear wire.
64...Put the wheels on the model and press the wheel retainers into
position. With the retainers in place, cut off the excess wire axle flush
with the retainer.
65...Secure the motor mount to the front of the motor with the four
flat head screws. Now bolt the motor to the firewall with 4-40 screws
and aluminum tube spacers. Note: Because the wires on the motor
are short, pass the wires from the speed controller thru the firewall
and attach to the motor before mounting the motor to the firewall.
66...Secure the speed controller to the fuselage with velcro. The
speed control can be mounted on the fuselage side or on the front of
former F-4.
67...Plug the speed control and servos into the receiver and attach the
receiver to the fuselage side with velcro. Pass the receiver antenna
back and out through the rear of the fuselage.
Page 15