- ページ 8

ハンダ付けガン AlienTek T100のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AlienTek T100 16 ページ。 Smart soldering station

ALIENTEK

6. Setting menu description

Note: Double-click the encoder on the main UI or warning UI to enter the menu UI, rotating

the encoder to select the menu option, click to enter next menu, long press to exit.

The soldering iron working mode (also called the temperature regulating mode) is divided

into the normal mode and the boost mode. The temperature adjustment method: rotating or

clicking the encoder in the main UI to enter the temp adjust UI, after the adjustment is completed,

it will automatically return to the main UI.

Normal mode：In the temp adjust UI, click the encoder the set temp cycle in the four levels

temperature (200, 300, 350, 450); rotating the encoder to adjust the set temp by step.

Boost mode：In the temp adjust UI, click the encoder the set temp switch between the boost

temp (default 420) and the previous temperature; rotating the encoder to adjust the set temp by

step. When returning to the main UI with boost temp, the boost countdown(boost time) will be

displayed in the upper right corner of the main UI. After the temperature reaches the boost temp,

the countdown will start.At the end of the timer, the set temp will return to the previos temp. The

boost main UI is shown in Figure 6.2 below.

T100 Smart Soldering station

Fig 6.1 mode select

Fig 6.2 boost main UI

User Manual