AlienTek T100 User Manual - Page 8

Browse online or download pdf User Manual for Soldering Gun AlienTek T100. AlienTek T100 16 pages. Smart soldering station

AlienTek T100 User Manual
ALIENTEK

6. Setting menu description

Note: Double-click the encoder on the main UI or warning UI to enter the menu UI, rotating
the encoder to select the menu option, click to enter next menu, long press to exit.

6.1 Mode select

The soldering iron working mode (also called the temperature regulating mode) is divided
into the normal mode and the boost mode. The temperature adjustment method: rotating or
clicking the encoder in the main UI to enter the temp adjust UI, after the adjustment is completed,
it will automatically return to the main UI.
Normal mode:In the temp adjust UI, click the encoder the set temp cycle in the four levels
temperature (200, 300, 350, 450); rotating the encoder to adjust the set temp by step.
Boost mode:In the temp adjust UI, click the encoder the set temp switch between the boost
temp (default 420) and the previous temperature; rotating the encoder to adjust the set temp by
step. When returning to the main UI with boost temp, the boost countdown(boost time) will be
displayed in the upper right corner of the main UI. After the temperature reaches the boost temp,
the countdown will start.At the end of the timer, the set temp will return to the previos temp. The
boost main UI is shown in Figure 6.2 below.
T100 Smart Soldering station
Fig 6.1 mode select
Fig 6.2 boost main UI
6
User Manual